All Kitchen Equipment

CONSTRUCTION :-Top border made of 16 gauge s.s sheet,with two removable frying sinks/ chambers made of s.s.each of size,two removable frying sinks/ chambers made of s.s.each of size 200mmx300x200mm deep,each with 3 kW electrical lift up type heater,with two removable s.s.mesh basket,with thermostat controls mounted on rear panel,with 100mm high s.s backsplash, with single 18 gauge s.s open undershelf, with rotary controls and pilot lamps on front sunken.

We are one of the leading manufacturers & suppliers of Food Processing Machine.

We have been able to manufacture and supply high quality Single and Double Deep Fat Fryer.

Construction: top of 16 gauge s. S. Sheet, duly matt finished, framework of s. S. Angle, with sink rhs,underside of unit provided with 2nos. Undershelf, with 1 overhead shelves of 16 gauge s. S. Duly strengthened, with 38mm dia. S. S. Pipe legs, with nylon adjustable feet.

Construction: top of 16 gauge s. S. Sheet, duly matt finished, framework of s. S. Angle, underside of unit provided with 2nos. Undershelf, with 1 overhead shelves of 16 gauge s. S. Duly strengthened,heater lamps with individual toggle swiches on both side or rr heater rods, with 38mm dia. S. S. Pipe legs, with nylon adjustable feet.

CONSTRUCTION: Body of sigri of 16 gauge s.s, provided with 380mm Dia. M.s. ghamela, with ignition window, with M-35 HP. Burner and pilot, with 38mm dia s.s. pipe legs.

CONSTRUCTION: Top and sink made of 16 gauge s.s. sheet duly matt finished, with sink of size 450mm x 450mm x 300mm deep located at rear, with 150mm high s.s. backsplash, with one no. 18 gauge .LHS platform with 38mm dia. s.s pipe legs with nylon adjustable feet.

CONSTRUCTION: Top made of 16 gauge s.s. sheet, with 150mm high s.s. backsplash, with 1 nos. undershelf of 18 gauge s.s. sheet, with 38mm dia. s.s. pipe legs, with nylon adjustable feet.

Construction: top made of 16 gauge s. S. Sheet, with 150mm high s. S. Backsplash, with 2 nos. Undershelf of 18 gauge s. S. Sheet, with 38mm dia. S. S. Pipe legs, with nylon adjustable feet.

We are a top notch supplier of SS Side Table.

Construction: top made of 16 gauge s. S. Sheet, with 150mm high s. S. Backsplash, with 18 gauge s. S. Sheet, with 38mm dia. S. S. Pipe legs, with nylon adjustable feet.

CONSTRUCTION: Top of 16 gauge s.s. sheet, duly matt finished, framework of s.s. angle, underside of unit provided with 2nos. undershelf, with 1 overhead shelves of 16 gauge s.s. duly strengthened, with 38mm dia. s.s. pipe legs, with nylon adjustable feet.

Construction :- Top and sink made of 16 guage S.S sheet dully matt finished,with sink of size 450mm x 450mm x 300mm deep located at LHS,with 150mm high S.S. Back and LHS splash,with 2 no. 18 guage S.S. Undershef located at rhs and 1 nos. Below remaining part of table,with 38mm diameter S.S. Pipe legs with nylon bullet adjustable feet.

CONSTRUCTION :-Top made of 16 guage s.s sheet dully matt fineshed,framework of s.s.angle,sides and back pf 18 guage s.s.sheet,front of unit open with center shelf,with 2 nos.overhead shelf of 16 gauge s.s.with insulated s.s.canopy fitted below top o/s provided with 4 nos heater lamps with individual toggle switches on both sides, provided with 38mm dia.s.s.pipe with nylon bullet adjustable feet.

Construction: -Top and sink made of 16 gauge s. S sheet dully matt finished, with the sink of size 350mmx350x300mm deep located at the rear, with s. S angle framework, 150mm high s. S. Backsplash, with wall mounted arrangement.

price range-

CONSTRUCTION: a Top border of 16 gauge s.s. sheet, of 16 gauge, back to be fully closed with 16 gauge s.s. sheet with proper welding, provided with 1 nos. H.P. L.P.G. / P.N.G. burners (1,00,000 btu each), with 38mm Dia. s.s. pipe legs, with nylon adjustable feet.

CONSTRUCTION :-Top border of 16 gauge s.s.sheet,with 150mm high s.s.sheet proper welding,gauge,back of the back splash to be fully closed with 16 gauge s.s.sheet with proper welding,provided with 2 nos.H.P.L.P.G/P.N.G (1,00,000 btu each),under shelf of 25mm dia.s.s.pipe to be provided, all burner provided with needle control valve and pilot lamps,with 38mm dia.s.s.pipe legs,with nylon bullet adjustable feet.

CONSTRUCTION :-Top border of 16 gauge s.s.sheet,provided with 4 nos.HP LPG / PNG.burners with heavy duty vessel rests and back of 18 guage and back of 18 guage s.s.with 20 guage s.s.drip trays,with s.s.control panel,burner to be provided with needle control valves and pilot lamps,underside to be provided with electrically operated oven with full s.s.door having small glass viewing panel,with 1.1/2" dia s.s.pipe legs,with nylon adjustable bullet feet.

CONSTRUCTION :-Top border of 16 gauge s.s.sheet,provided with 4 nos.HP LPG / PNG.burners with heavy duty vessel rests and back of 18 guage and back of 18 guage s.s.with 20 guage s.s.drip trays,with s.s.control panel,burner to be provided with needle control valves and pilot lamps,with 1.1/2" dia s.s.pipe legs,with nylon adjustable bullet feet.

CONSTRUCTION :-L.P.G / P.N.G operated,top provided with 15mm thick polished m.s plate fitted on m.s angle frame work cladded with s.s.sides and back of 18 guaga s.s.sheet,with s.s.spillage trough.with 100mm high raised sloping s.s.border on three sides,with s.s.front panel with necessary V burner provided below plate,with needle control valves,with single 18 guage s.s.sheet pipe undershelf,with 38mm dia.s.s.pipe legs,with nylon bullet adjustable feet.

CONSTRUCTION :-LPG operated,full exterior body of 18 guage s.s.sheet,provided with 2 steaming cabinets with individual doors,underside of unit provided with heavy duty steam generator unit,cover from front,with auto steam control valve,fitted on 38 mm dia.s.s.pipe legs with nylon adjustable feet,provided with 8 nos.die pressed trays.

CONSTRUCTION: Entire shelf made of 18 gauge s.s. sheet, with sturdy s.s. angle brackets for wall fitting, with 50mm high s.s. backsplash

Vegetable Chopper offered come designed and developed using latest technology support and can be made available in cutting size of 0 to 60mm as well as in per hour working capacity of 300 to 1000kg. The working of the system is electrical based with requirements of 220V or 380V voltage as well as providing output power support of 1HP or others as demanded by the customers. Some of its features include:

 

• Allow cutting of leafy vegetables like garlic, celery, cabbage, spinach, lettuce
• Also allow cutting of root vegetables like carrot, onion
• Allows strip, slice or cube shape cutting by changing of blades
• Speed of knife and belt can be accurately adjusted
• Suitable for those kitchens of restaurant, food processing factory, supermarket

Our organization is very popular in offering Drum Tandoor to our clients.

Construction: top and sink made of 16 gauge s. S. Sheet duly matt finished, with a sink of size 450mm x 450mm x 300mm deep located at the rear, with 150mm high s. S. Backsplash, with one no. 18 gauge s. S. Undershelf, with 38mm Dia. S. S pipe legs with nylon adjustable feet.

Construction: top and sink made of 16 gauge s. S. Sheet duly matt finished, with a sink of size 450mm x 450mm x 300mm deep located at the rear, with 150mm high s. S. Backsplash, with one no. 18 gauge s. S. Undershelf, with 38mm Dia. S. S pipe legs with nylon adjustable feet.

CONSTRUCTION: Single compartment type, top covers made of 18 gauge s.s sheet, with 15mm dia. s.s. pipe handles, with heavy weight m.s. griller plates, with front panel having complete electrical controls and fitting.

Owing to our state-of-art manufacturing unit and the usage of leading-edge technology, we are able to present the impeccable quality Plate Drain Rack.

CONSTRUCTION: Top of 16 gauge s.s. with 150mm high s.s. backsplash, with under construction of s.s., with raised border type lipping closed on three sides, open only at rhs., to synchronise with dish washing machine lip, underside provided with 4 pairs of s.s. angles for holding dish washer baskets / racks, with 38mm dia. s.s. pipe legs, with nylon adjustable feet.

CONSTRUCTION: Top consisting of 100mm deep trough made of 16 gauge s.s. sheet, duly matt finished, with complete under construction of s.s. angle frame, with garbage chute of 150mm dia.s.s.shelf of 18" ht.shelf for glasses located at 20"ht., with overhead pipe frames above made of 25mm dia. 38mm dia. s.s. pipe legs, with nylon adjustable feet, unit provided with 25mm dia. s.s. cross bracing, unit underside open.

CONSTRUCTION: Three shelves of 16 gauge s.s. creating two compartments, sides and back made of 18 gauge s.s. sheet, duly matt finished, with bolting arrangement for wall hanging.

CONSTRUCTION :-Top border of 16 gauge s.s.sheet,with 150mm high s.s.sheet proper welding,gauge,back of the back splash to be fully closed with 16 gauge s.s.sheet with proper welding,provided with 1 nos.H.P.L.P.G/P.N.G (1,00,000 btu each),under shelf of 25mm dia.s.s.pipe to be provided, burner provided with needle control valve and pilot lamps,with 38mm dia.s.s.pipe legs,with nylon bullet adjustable feet.

CONSTRUCTION :-L.P.G / P.N.G operated,top provided with 15mm thick polished m.s plate fitted on m.s angle frame work cladded with s.s.sides and back of 18 guaga s.s.sheet,with s.s.spillage trough.with 100mm high raised sloping s.s.border on three sides,with s.s.front panel with necessary V burner provided below plate,with needle control valves,with single 18 guage s.s.sheet pipe undershelf,with 38mm dia.s.s.pipe legs,with nylon bullet adjustable feet.